View Detail Images
|
|
|
QTY:
|
|
|
|
|
|
|
|
|
$54.00
|
|
|
Thermaltake AquaBay M5 Alarm System CL-W0103, w/ Liquid Temperature and Level Alarm SKU: CL-W0103
Features:
Built-in liquid temperature and level alarm: The signal will flash, error beeps will occur and the LCD panel will change colors from blue to red when the coolant is below the "low" mark. The LCD panel will change colors from blue to red if the temperature of the system is higher than the set alarm temperature. Fast response probe: Temperature probe can detect the water temperature in real-time. Liquid level probe can detect the coolant level in real-time. User Friendly: The temperature probe can be put at anywhere within the LCS loop. Quick Install Connectors: The temperature probe connector is suitable for tubing of ID 6.4mm(1/4")/9.5mm(3/8").
Specification:
Functions of LCD panel: Sampling rate: 1 sec. Water temp. range: 0oC ~ 95oC. Resolution: 0.1oC. Accuracy: +/- 1oC. Display: Constant/Real time. Temp alarm setting range: 25o C ~ 70oC+/- 5o C. Temp. normal status: LCD with blue light. Temp. and liquid level alarm warning: LCD with red light. The signal will flash and error beeps will occur when the coolant is below the "low" mark. P500 pump: Rated voltage: DC 12V. Input current: 600 mA. Bearing: Ceramic bearing. Flow rate: 500L/h. Connector: 3pin, 4pin. LED: Blue. Noise: 16dB. Life time: 80,000 hours. Capacity of liquid tank: 350 cc. The temp. probe: Swiftly read the temperature of your system. Quick install connectors: for ID 6.4 mm(1/4") tubing. for ID 9.5 mm(3/8") tubing.
|
|
