Sparkle FSP150-50PL 150W Flex ATX With RoHS & PFC Switching Power Supply Bulk-pack SKU: FSP150-50PL1R

Sparkle FSP150-50PL 150W Flex ATX With RoHS & PFC Switching Power Supply Bulk-pack SKU: FSP150-50PL1R



Discontinued, currently there are no replacement parts available.


SKU
FSP150-50PL1R

DESCRIPTION

Specification:
Mfr P/N: FSP150-50PL1R
20pin main connector
RoHS Ready
Complied with Flex ATX standard
Active Power Factor Correction Meeting with EN61000-3-2
High efficiency and reliability
Remote On/Off function
Internal 12V DC ball bearing fan included
Noise Killer (Thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
Input:
Input Range: 90~265V AC, Full Range Input
Frequency: 47~63Hz
Input Current: 4A (RMS) @ 115V AC, 2A (RMS) @230V AC
Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
Output:
Total Watts: 150 W
+5V and +3.3V total output not exceed 85W
+12V, +3.3V, +5V, and +12V will have the regulation ±10% when all load take off
Dielectric Withstand: Input to frame ground 1800V AC for 1 second
Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
MTBF: 100,000 hours on maximum load at +25°C
This power unit has (1) 20 pin ATX connector, (3) peripheral power connectors, and (1) floppy drive connector.
Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm

CUSTOMERS ALSO BOUGHT

SEND TO FRIEND

*
*
*
 

CUSTOMER REVIEWS

Product rating


There have been no reviews for this product.