Micro ATX-180V ( Emachine ) Micro ATX 180W SFX12V Power Supply, bulk-pack SKU: 9PA1800810-E

Discontinued, currently there are no replacement parts available.


SKU
9PA1800810-E50NIV

DESCRIPTION

Micro ATX-180V ( Emachine ) SFX12V

This Micro ATX power supply is a 180W, SFX Form Factor, five output unit with remote on/off, energy star certification, UL, CSA, CB, TUV, NEMKO and CE approvals. Airflow drawn out of case by 80mm internal fan. AC input is positioned on long side of power supply. Compliant with Intel P4 SFX12V Power Design Guide 2.0 and AMD Athlon requirements Upgrade for Ilssan ISP 120S, Bestec ATX-100-5, HIPRO HP-K1507A3C, Delta DPS-145PB-111, Delta DPS-120AB A, HeroIchi HEC-145FC and All Emachine etowers, emonsters, and others except the E-1 model. Includes, but not limited to, models 266, 300, 300C, 300K, 333C, 333CS, 333K, 333I, 333ID, 366I, 366ID, 366C, 366IS, 366I2, 400I2, 400ID, 400IDX, 400IX, 400I, 400I3, 433I, 466I, 466ID, 466IS, 466IX, 500I, 500ID, 500IDX, 500IS, 500IX, 533ID, 533IR, 533I, 533ID2, 566I, 566I2, 566IRX, 566IR, Also works with eMonster 500, 500A, 550, 550R, 600, 700, 800, T1090, T1096, T1100, T1110, T1115, T1116, T1120, T1125, T1400, T1801, T1855, T1901, T1930, T3100, T4130, T4150, T4155, T4160, T4165, T4200

This Power Unit Has 4 Peripheral, 1 Floppy, 1 ATX connector, 1 ATX12V Connector, 1 Video P8 Cable Please View Picture for Details


Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).

Temperature range: operating 0º ~50ºC, storage-20º ~ +65ºC

Temperature coefficient: 0.01% / 0º

Transient response: output voltage recovers in less than 1 ms max. following a 25%load change

Hold-up time:
16.6ms minimum – at 115V/60Hz.
16.6ms minimum –at 230V50Hz.

Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second

Humidity: 5~95% RH

Efficiency: 65% min. 70% typical, at full load

Power good signal: turn-on delay 100ms to 500ms

Over voltage protection:
+5V output 6.5V
+3.3V output 4.6V
+12V output 15.5V

Dimensions US 4.9" x 3.9" x 2.5"
Safety UL, CSA, TUV, NEMKO, CB, CE

CUSTOMERS ALSO BOUGHT

  • caseen Ottimo Apple iPhone 6 Wallet Case (Black)

    The caseen Ottimo Wallet series case for the Apple iPhone 6 / 6 Plus features 3 credit card holders, and cash carry flap. Ottimo Wallet also features a useful kickstand feature, and a strong magnetic closure to ensure your Apple iPhone 6 / 6 Plus stays secure in place.
    SKU: CS-80494
    $14.99
  • caseen Ottimo Apple iPhone 6 Wallet Case (Brown)

    The caseen Ottimo Wallet series case for the Apple iPhone 6 / 6 Plus features 3 credit card holders, and cash carry flap. Ottimo Wallet also features a useful kickstand feature, and a strong magnetic closure to ensure your Apple iPhone 6 / 6 Plus stays secure in place.
    SKU: CS-80497
    $14.99
  • caseen Ottimo Apple iPhone 6 Wallet Case (Pink)

    The caseen Ottimo Wallet series case for the Apple iPhone 6 / 6 Plus features 3 credit card holders, and cash carry flap. Ottimo Wallet also features a useful kickstand feature, and a strong magnetic closure to ensure your Apple iPhone 6 / 6 Plus stays secure in place.
    SKU: CS-80495
    $14.99
  • caseen Ottimo Apple iPhone 6 Wallet Case (Teal)

    The caseen Ottimo Wallet series case for the Apple iPhone 6 / 6 Plus features 3 credit card holders, and cash carry flap. Ottimo Wallet also features a useful kickstand feature, and a strong magnetic closure to ensure your Apple iPhone 6 / 6 Plus stays secure in place.
    SKU: CS-80496
    $14.99
  • caseen Ottimo Samsung Galaxy S6 Edge Wallet Case (Pink)

    The caseen Ottimo Wallet series case for the Samsung Galaxy S6 Edge features 3 credit card holders, and cash carry flap. Ottimo Wallet also features a useful kickstand feature, and a strong magnetic closure to ensure your Samsung Galaxy S6 Edge stays secure in place.
    SKU: CS-80575
    $14.99
  • caseen TERRA Samsung Galaxy Note 4 Wallet Case w/ ID (Black/White)

    Our flagship wallet case for the Samsung Galaxy Note 4 features two tone caseen versed leather stitched to perfection. It is perfect to replace your everyday wallet with 2 cash pockets, 2 credit card pockets, and ID window pocket. Included kickstand function allows you to consume your media effortlessly. A polished clasp system closes everything together. Finally, a microphone cutout allows you to talk on the phone and avoid accidental hang-ups from your cheek rubbing on the bare phone screen!
    SKU: CS-80532
    $14.99
  • Dynatron 92×25 mm Fan PWM Aluminum Fin Heatsink Copper 3U&Up Server

    92×25 mm Fan with PWM Function. Aluminum Radial Fin Heatsink with Copper Inserted. Desktop, 3U&Up Server up to CPU Power 95 Watts.

    SKU: K985
    $22.50
  • Dynatron DF125020BH 50x50x20mm 5800RPM High Speed Fan 3 Pin Model: DF125020BH

    Rated Speed: 4500 RPM
    Bearing Type: 2 Ball Bearing Bearing
    Air Flow: 20.85 CFM , Noise: 32.00
    SKU: DF125020BH
    $4.99
  • Dynatron K5 92x25mm PWM 2 Ball CPU Cooler 77 Watts Aluminum Heatsink

    Dynatron K5 92mm 2 Ball CPU Cooler for Intel LGA Socket 1151 / 1150 / 1155 / 115

    SKU: K5
    $14.99

SEND TO FRIEND

*
*
*
 

CUSTOMER REVIEWS

Product rating


There have been no reviews for this product.