View Detail Images
|
|
|
QTY:
|
|
|
|
|
|
|
|
|
$476.30
|
|
|
Iomega Backup Device ATAPI Backup Kit 35GB 4200rpm SKU: 33402
The Iomega REV ATAPI Backup Kit is a revolutionary removable hard disk system which makes backing up and archiving easy by providing everything needed to keep critical data safe and secure. This professional-level backup kit includes one Iomega REV ATAPI drive and six Iomega 35GB REV disks - one disk for each weekday backup and one disk for full system backup and disaster recovery - all at a value only Iomega can provide. Each Backup Kit also includes powerful CA BrightStor ARCserve Backup software for professional-level full system backup capabilities for both servers and workstations - an estimated 1,000 value.
Capacity - Native 35GB , High compression w/included software 70GB, Usable data bytes 35,002,122,240
Interface/connection type - ATAPI
Weight - Drive 0.93 lbs. (424 grams) , Disk 2.58 ounces (73 grams)
Dimensions (L x W x H) - Drive 5.75 in x 3.99 in x 1 in. , Disk 2.95 in x 3.03 in x 0.39 in
Configuration
-Bytes per Sector 2,048, User Logical Sectors 17,090,880, Track Density (normal) 88,000 tracks/inch, Linear Density (max) 695,000 bits/inch,Areal Density (max) 61.16 Gigabits/square inch
-Number of Heads 2, Head Type GMR, Number of Disks 1, Substrate Type Smooth Glass disk, Servo Embedded, Zones 18, Data Recording Method (coding) 48/50 Modified EPRML
Power requirements - Power Supply 5.0 /- .25 V D.C., up to 1.2 amps continuous current
Seek time - Minimum (single track) 2.5 ms (read), 3.0 ms (write), Average 12 ms (read), 13 ms (write), Maximum 25 ms
Latency - 7.1 ms
Spindle Speed - 4200 rpm
Start Time - 12 sec
Stop Time (including eject) - 6 sec
Native Drive Transfer Rate (USB 2.0) - Burst (USB 2.0) 60 MB/sec, Max. Data Transfer Rate (outer disk) 25.4 MB/sec, Max. Data Transfer Rate (inner disk) 12.7 MB/sec
Native Drive Transfer Rate (USB 1.1) - Max. Data Transfer Rate 1.5 MB/sec
MTBF - 400,000 hours
Unrecoverable Data Error Rate - (projected) 1 error in 1015 bits transferred
Cartridge Life - 2,000 insertion and removal cycles
Drive Life - 10,000 insertion and removal cycles
Drive Service Life - more than 30 years
Typical Insertion Force - 1.5 kgf (3.3 lbf)
Drive Supply Voltage - 5.0 V
Seek (Peak) - 1.18 A current draw 5.9 W power consumption
Startup (Peak) - 1.15 A current draw 5.8 W power consumption
Eject (Peak) - 0.92 A current draw 4.6 W power consumption
Continuous Writes (RMS) - 0.92 A current draw 4.6 W power consumption
Continuous Reads (RMS) - 0.89 A current draw 4.5 W power consumption
Random Read-Writes (RMS)- 0.89 A current draw 4.5 W power consumption
Idle (RMS) - 0.60 A current draw 3.0 W power consumption
Additional Features
-Advanced air filtration, automatic head cleaning, and robust two-stage error correction to ensure high data integrity and reliability
-Automatic sector reallocation
-Adaptive power save control
-MMC-4 multi-media command set
|
|
