This is a FSP212-3F02 Viewsonic LCD HDTV N3251W N2635W N3235W Open Frame Power Supply. These are brand new and direct from the manufacturer.
• AC Input 90 - 264 VAC, 3A, 47-63 Hz
• UL, CB, CE, TUV, NEMKO, CCC, PSE, EMC
• 212 watts
• 24V, 6A
• Efficiency: >84% at Full Load
• 32" Open Frame
• Dimensions: 7.1" x 5.1" x 1.2" (L x W x H)
• High Efficiency
• Energy Saver
• Open Frame Power Supply for qualified technicians only
NOTE: Great FSP replacement power supply for Hanspree and Viewsonic screens. Please Note: This FSP212-3F02 is a new Substitute Power Supply Module that works as replacement for the discontinued FSP212-3F01. A modification must be performed as the new FSP212-3F02 does not have the soldered-on wiring to the 12 pin female connector. For the 12 pin connector you must connect (solder) the 12 wires from your old FSP212-3F01 to the new FSP212-3F02. You need to be careful during soldering because the traces are very close together so this is for skilled technicians only. Please note the the pin-out orientation between the FSP212-3F01 and 3F02. They are different: one counts from right to left and the other from left to right. If you are replacing the Darfon 4H.B0280.001 with FSP212-3F02 Please Note: you will need a new wiring harness.
Viewsonic N3251W (Make sure the length of wiring harness is long enough to reach mainboard.)