View Detail Images
|
|
|
QTY:
|
|
|
|
|
|
|
|
|
In Stock
$21.99
|
|
|
FSP Group (Fortron Source) ATX300-PA version 2.2 RoHS, SATA, 300W Power Supply OEM SKU: ATX300-PA
P/N: ATX300-PA
Type ATX 12V (v2.2)
Maximum Power 300W
Fans 1
PFC No
Main Connector 20 + 4Pin
Dual +12V Yes
PCI-E Connectors No
SLI Support No
Modular Cabling Support No
Power Good Signal 100-500ms
Hold-up Time 12.0mS minimum at 115V/60Hz or 230V/50Hz (Full Load)
Efficiency > 70%
Over Voltage Protection +3.3V (4.6V max.), +5V (6.5V max.), 12V1 (15.5V max.), 12V2 (15.5V max.)
Overload Protection Yes
Input Voltage 110 - 127/220 - 240V
Input Frequency Range 50/60 Hz
Input Current 7A @ 115V, 4A @ 230V
Output +3.3V@20A, +5V@20A, +12V1@16A, +12V2@16A, -12V@0.8A, +5VSB@2A
MTBF 100K hours at 25°C
Approvals UL, CSA, TUV, NEMKO, CB & FCC
Connectors
1 x Main connector (20+4 pin)
1 x 12V (P4)
4 x peripheral
1 x SATA
1 x Floppy
Features Remote ON/OFF Control:
The power supply shall accept a logic open collector level which will disable / enable all output voltage (excluding +5V standby).
Over-current protection: +3.3V (66.0A max.), +5V (50.0A max.), 12V1 (27.0A max.), 12V2 (27.0A max.)
Temperature range: operating 0°C~50°C, storage -20°C~65°C
Humidity: 90~95% RH
Dielectric strength: primary to Frame Ground 1800 VAC for 1 second, primary to secondary 1800 VAC for 1 second
|
|
