View Detail Images
|
|
|
QTY:
|
|
|
|
|
|
|
|
|
| Quantity Pricing |
|
|
| 2 to 9pcs |
$44.50 each |
| 10pcs & up |
$44.05 each |
In Stock
$44.95
|
|
|
FSP FSP240-60PLA FLEX ATX 240W Active PFC Power Supply OEM SKU: FSP-240-60PLA(ST)
Specifications:
Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).
Temperature range: operating 0~50 ¢XC storage-20~+80 ¢XC
Temperature coefficient:0.01%/¢XC
Transient response: output voltage recovers in less than 1 ms max. following a 25%load change
Hold-up time: 17.0 mS minimum : at 115V / 60 Hz.
17.0 mS minimum : at 230V / 50 Hz.
Dielectric withstand: input / output 1800VAC for1 second,
input to frame ground 1800VAC for 1 second
Humidity: 5~95% RH
Efficiency: 68% min. 115VAC@ full load
Power good signal: turn-on delay 100ms to 500ms
Over current protection
Over voltage protection: +5V +3.3V +12V
Active PFC(Power Factor Correction) circuit at 230 Vac
Low ripple & Noise
Line input fuse protection
With 4cm fan
Input Characteristics:
Voltage: 230 VAC
Frequency: 47Hz to 63Hz
Input current: 5 amps maximum / 115 Vrms
3 amps maximum / 230 Vrms
Inrush current: 50 amps cold, 80 amps warm measured at 230 Vrms
Output Characteristics:
Output Voltage: +3.3v +5v +12v -12v +5vsb -5v
Connector: 3 Peripheral, 1 Floppy, 1 ATX connector, and 1 ATX12V connector
Size: 150(L)*81.5(W)*40.5(H) mm
Safety Standard: UL,CSA TUV, NEMKO CB & CE
Warranty: 1 YEAR
Weight: 3 pounds
|
|
