250W Replacement compatible with:
HP Pavilion s7210n, 220n, s7310n, s7320n, s7410n, s7420n, s7421c, s7400n, s7415c, s7500n, s7510n, s7515x, s7520n, s7527c, s7530n, s7500y, s7540a, s7500e, s7520kr, s7517c, s7600y, s7520la, s7600e, s7521k, s7545a, s7600n, s7605n, s7617c, s7620n, s7627c, s7612n, s7550d, s7620la, s7525a, s7640la, s7613w, s7603w, s7531kr, s7700n, s7727c, s7700y, s7700e, s7740LA, s7720LA, s7541kr, s7712n, s7713w.
Note! It is necessary to purchase two of the "IDE to SATA" adapters.
HP Pavilion s7000,HP Pavilion s3220n, HP Pavilion S3420F
Note: one screw hole lines up. recommend using zip ties to secure the power supply
This power unit has (1) 24 pin ATX connector, (1) ATX12V connector, (3) peripheral power connectors, (2) SATA connector, and (1) floppy drive connector.
Note: "IDE to SATA" adapter is offered below.
Output Wattage 250W
80 PLUS Bronze Certified: Power Supply Units (PSUs) that have more than 80% energy efficiency at 20%, 50% and 100% of rated load, and a power factor of 0.9 or greater at 100% load. That is, PSUs that waste 20% or less electric energy as heat at the specified load levels, thus reducing electricity use and bills compared to less efficient PSUs.
Dimension: 3.2"(W) X 5.9"(L) X 1.7"(H)
Form Factor: TFX12V
Active PFC/CE, UL/CUL Safety Compliant
Input Voltage: 100-240V 4-2A VAC Auto Sensing
Holdup Time: > 14ms @ Full Load
MTBF: 100,000 HRS
DC Output: +3.3V 17A, +5V 13A, +12V 16A, -12V 0.3A, +5Vsb 2A
Dimensions: 5.9"x 3.2"x 1.7" (150Lx82Wx43H mm)
1x 20/24 Pin ATX Connector
1x 4-Pin 12V
3x Peripheral Connectors (MOLEX 4 PIN)
1x Power Connector for Floppy Drives.
2x SATA connectors
Note: If you own the early Shuttle SS51G & SV25 with the wires coming out the top (long side) of the power supply, this model may not fit in your case.