180W TFX12V Flex ATX P4 OEM POWER SUPPLY bulk-pack SKU: FSP180-60SAV

180W TFX12V Flex ATX P4 OEM POWER SUPPLY bulk-pack SKU: FSP180-60SAV



Discontinued, but an equivalent compatible replacement part is available! Click links below.


SKU
FSP180-60SAV
Equivalent Compatible Replacement Parts
Replacement #1: Click to see SKU: FSP300-60GHT

DESCRIPTION

Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).
Temperature range: operating 0-50 storage-20-+65
Temperature coefficient:0.01%
Transient response:
output voltage recovers in less than 1 ms max.
following a 25%load change
Hold-up time: 10.0ms minimum at full load (With PFC)
16.6 ms minimum at full load (Without PFC)
Dielectric withstand:
input / output 1800VAC for1 second,
input to frame ground 1800VAC for 1 second
Humidity: 5~95% RH
Efficiency: 65% min. 70% typical, at full load
Power good signal: turn-on delay 100ms to 500ms
Inrush current: 50A cold, 70A warm at 264 VAC
Over voltage protection:
+5V output 6.5V
+3.3V output 4.6V
+12V output 15.5V
Model: FSP180-60SAV
Form Factor: Flex ATX
Watts: 180W
Safety: All
Frequency: 47Hz to 63 Hz
Inrush current: 50A cold, 70A warm at 132 Vrms
Input current:
4.0A maximum / 230V, 50Hz
7.0A maximum / 115V, 60Hz
This power unit has (1) ATX connector, (1) ATX12V connector, (2) peripheral power connectors, and (1) floppy drive connector
TFX dimensions of 175x85x65mm (6.7"x3.4"x2.6").
Please View Picture for Detail

CUSTOMERS ALSO BOUGHT

SEND TO FRIEND

*
*
*
 

CUSTOMER REVIEWS

Product rating


There have been no reviews for this product.